Inspection
The five checks that decide a batch.
Wire in
Diameter, tensile strength and zinc coating weight checked against the order before drawing or welding.
Aperture
Mesh opening measured across the panel and at the edges, with tolerance recorded per roll or sheet.
Joint strength
Weld shear or twist integrity tested on samples from the first and last of each run.
Coating
Zinc or PVC thickness checked for consistency, colour matched against the approved sample.
Packing
Roll ends protected, moisture barrier fitted, pallet or crate strapped and labelled for the destination port.
Custom work
What “made to order” actually covers.
Aperture & wire
Any opening from 6 mm to 150 mm, wire from 0.5 mm to 8 mm, subject to machine capability.
Rolls & panels
Roll width up to 2 m, panel size to 3×6 m, edge folds, hooks and cut-outs as drawn.
Coating
Hot-dip galvanized, electro-galvanized, Zn-Al, PVC in RAL colours, powder coating, stainless 304/316.
Private label
Printed wrapping, buyer labels, bar-coded pallets and mixed SKU containers.
Paperwork
Mill certificate, inspection report, packing list, certificate of origin and fumigation where required.
Technical reply
Drawings marked up with achievable tolerances before you commit to a purchase order.
Before you buy
Sample first, then scale.
Cut samples of standard mesh are free of charge; custom samples are quoted at material cost and credited against the bulk order. Courier cost sits on the buyer’s account.