Quality & OEM

Quality & custom work

Checked batch by batch, before it goes on the pallet.

Five inspection points, one record, and custom specifications produced to your drawing rather than to a catalogue.

Inspection

The five checks that decide a batch.

01

Wire in

Diameter, tensile strength and zinc coating weight checked against the order before drawing or welding.

02

Aperture

Mesh opening measured across the panel and at the edges, with tolerance recorded per roll or sheet.

03

Joint strength

Weld shear or twist integrity tested on samples from the first and last of each run.

04

Coating

Zinc or PVC thickness checked for consistency, colour matched against the approved sample.

05

Packing

Roll ends protected, moisture barrier fitted, pallet or crate strapped and labelled for the destination port.

Custom work

What “made to order” actually covers.

Geometry

Aperture & wire

Any opening from 6 mm to 150 mm, wire from 0.5 mm to 8 mm, subject to machine capability.

Format

Rolls & panels

Roll width up to 2 m, panel size to 3×6 m, edge folds, hooks and cut-outs as drawn.

Surface

Coating

Hot-dip galvanized, electro-galvanized, Zn-Al, PVC in RAL colours, powder coating, stainless 304/316.

Brand

Private label

Printed wrapping, buyer labels, bar-coded pallets and mixed SKU containers.

Documents

Paperwork

Mill certificate, inspection report, packing list, certificate of origin and fumigation where required.

Support

Technical reply

Drawings marked up with achievable tolerances before you commit to a purchase order.

Before you buy

Sample first, then scale.

Cut samples of standard mesh are free of charge; custom samples are quoted at material cost and credited against the bulk order. Courier cost sits on the buyer’s account.

Request samples